QUIZ CISCO - 300-730 - IMPLEMENTING SECURE SOLUTIONS WITH VIRTUAL PRIVATE NETWORKS AUTHORITATIVE VCE EXAM SIMULATOR

Quiz Cisco - 300-730 - Implementing Secure Solutions with Virtual Private Networks Authoritative VCE Exam Simulator

Quiz Cisco - 300-730 - Implementing Secure Solutions with Virtual Private Networks Authoritative VCE Exam Simulator

Blog Article

Tags: VCE 300-730 Exam Simulator, 300-730 Clearer Explanation, 300-730 New Braindumps Book, 300-730 Valid Test Tips, Valid 300-730 Exam Topics

What's more, part of that TrainingDumps 300-730 dumps now are free: https://drive.google.com/open?id=1SGbJUnYLI1apMywGvupOJdIY5a1uGmQ6

By years of diligent work, our experts have collected the frequent-tested knowledge into our 300-730 practice materials for your reference. By resorting to our 300-730 study guide, we can absolutely reap more than you have imagined before. We have clear data collected from customers who chose our 300-730 Actual Exam, the passing rate is 98-100 percent. So your chance of getting success will be increased greatly by our 300-730 learning quiz.

It is important to check the exercises and find the problems. Once you use our 300-730 study prep to aid your preparation of the exam, all of your exercises of the study materials will be carefully recorded on the system of the 300-730 exam braindump. Also, you can know your current learning condition clearly. The results will display your final scores on the screen. Also, you will know the numbers of correct and false questions of your exercise. Our 300-730 test question grading system is designed to assist your study, which is able to calculate quickly. So you don’t need to wait for a long time. The calculating speed of our 300-730 study prep is undergoing the test of practice. The highest record is up to five seconds. There has no delay time of the grading process. Slow system response doesn’t exist. In addition, the calculation system of the 300-730 test question is very powerful and stable. We promise that the results of your exercises are accurate.

>> VCE 300-730 Exam Simulator <<

Overcome Fear of Exam with Cisco 300-730 Exam Dumps

The Implementing Secure Solutions with Virtual Private Networks (300-730) certification is a valuable credential that every Cisco professional should earn it. The Implementing Secure Solutions with Virtual Private Networks (300-730) certification exam offers a great opportunity for beginners and experienced professionals to demonstrate their expertise. With the Implementing Secure Solutions with Virtual Private Networks (300-730) certification exam everyone can upgrade their skills and knowledge. There are other several benefits that the Cisco 300-730 exam holders can achieve after the success of the Implementing Secure Solutions with Virtual Private Networks (300-730) certification exam.

Exam Topics

300-730 assesses you to see how well you have grasped concepts and skills regarding the domains included in the syllabus. These are as follows:

  • Remote access VPNs
  • Secure architectures for communications
  • Troubleshooting with ASDM & CLI
  • Site to site VPNs targeting routers as well as firewalls

Although these are the main areas that you could get tested for in 300-730 Exam, other related topics may come up in the exam. As such, you must study extensively and use all available resources to acquire the needed knowledge and be able to handle any possible questions.

Cisco Implementing Secure Solutions with Virtual Private Networks Sample Questions (Q73-Q78):

NEW QUESTION # 73
Refer to the exhibit.

An IKEv2 site-to-site tunnel between an ASA and a remote peer is not building successfully. What will fix the problem based on the debug output?

  • A. Ensure copyright IPsec policy matches on both VPN devices.
  • B. Correct copyright access list on both VPN devices.
  • C. Specify the peer IP address in the tunnel group name.
  • D. Install the correct certificate to validate the peer.

Answer: A


NEW QUESTION # 74
Which VPN technology must be used to ensure that routers are able to dynamically form connections with each other rather than sending traffic through a hub and be able to advertise routes without the use of a dynamic routing protocol?

  • A. GETVPN
  • B. FlexVPN
  • C. DMVPN Phase 2
  • D. DMVPN Phase 3

Answer: D

Explanation:
DMVPN stands for Dynamic Multipoint VPN, which is a technology that allows routers to dynamically form VPN tunnels with each other without requiring a pre-configured static copyright map. DMVPN uses Multipoint GRE (mGRE) interfaces and Next Hop Resolution Protocol (NHRP) to establish direct connections between routers. DMVPN has three phases of operation, each with different features and benefits.
DMVPN Phase 1 is the basic configuration, where all spokes are configured with a single mGRE interface that points to the hub as the NHRP server. The spokes can only communicate with the hub, not with each other. All traffic must go through the hub, which creates a bottleneck and increases latency.
DMVPN Phase 2 improves on Phase 1 by allowing spoke-to-spoke communication without going through the hub. This is achieved by using NHRP to dynamically resolve the IP address of the destination spoke and create a direct GRE tunnel between the spokes. However, this still requires the use of a dynamic routing protocol to advertise routes between the spokes, which adds overhead and complexity.
DMVPN Phase 3 further enhances Phase 2 by enabling spoke-to-spoke communication without requiring a dynamic routing protocol. This is done by using NHRP shortcut switching and NHRP redirect messages. When a spoke wants to send traffic to another spoke, it sends an NHRP resolution request to the hub, which responds with an NHRP redirect message containing the IP address of the destination spoke. The source spoke then creates a direct GRE tunnel with the destination spoke and switches the traffic to the new tunnel. The hub also sends an NHRP resolution reply to the destination spoke, informing it of the source spoke's IP address. The destination spoke then creates a direct GRE tunnel with the source spoke and switches the traffic to the new tunnel. This way, the spokes can communicate directly without using a dynamic routing protocol or going through the hub.


NEW QUESTION # 75
Refer to the exhibit.

A customer cannot establish an IKEv2 site-to-site VPN tunnel between two Cisco ASA devices. Based on the syslog message, which action brings up the VPN tunnel?

  • A. Correct the copyright access list on both Cisco ASA devices.
  • B. Increase the maximum in-negotiation SA limit on the local Cisco ASA.
  • C. Reduce the maximum SA limit on the local Cisco ASA.
  • D. Remove the maximum SA limit on the remote Cisco ASA.

Answer: B

Explanation:
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/sec_conn_ikevpn/configuration/xe-3s/sec-ike-for-ipsec-vpns-xe-3s-book/sec-call-addmsn-ike.html


NEW QUESTION # 76
A network engineer must configure the Cisco ASA so that Cisco AnyConnect clients establishing an SSL VPN connection create an additional tunnel for real-time traffic that is sensitive to packet delays. If this additional tunnel experiences any issues, it must fall back to a TLS connection.
Which two Cisco AnyConnect features must be configured to accomplish this task? (Choose two.)

  • A. OMTU
  • B. DPD
  • C. DTLS
  • D. SSL Rekey
  • E. DSCP Preservation

Answer: B,C

Explanation:
Configure Dead Peer Detection Dead Peer Detection (DPD) ensures that the ASA (gateway) or the client can quickly detect a condition where the peer is not responding, and the connection has failed. To enable dead peer detection (DPD) and set the frequency with which either the AnyConnect client or the ASA gateway performs DPD, do the following: Before you begin This feature applies to connectivity between the ASA gateway and the AnyConnect SSL VPN Client only. It does not work with IPsec since DPD is based on the standards implementation that does not allow padding, and CLientless SSL VPN is not supported. If you enable DTLS, enable Dead Peer Detection (DPD) also. DPD enables a failed DTLS connection to fallback to TLS. Otherwise, the connection terminates.
https://www.cisco.com/c/en/us/td/docs/security/asa/asa96/configuration/vpn/asa-96-vpn- config/vpn-anyconnect.html


NEW QUESTION # 77
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly, and all tunnel stats show that they are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?

  • A. Adjust the MTU size within the routers.
  • B. Change DMVPN timeout values.
  • C. Replace certificate on the RDP server.
  • D. Add RDP port to the extended ACL.

Answer: A


NEW QUESTION # 78
......

300-730 training materials are famous for instant access to download, and you can receive your download link and password within ten minutes after payment. And if you don’t, you don’t receive, you can contact with us, we will resolve it for you. Besides, we offer free demo for you, we recommend you to have a try before buying 300-730 Training Materials. You can enjoy free update for 365 days if you choose us, so that you can obtain the latest information timely. And the latest version for 300-730 exam dumps will be sent to your email automatically. You just need to receive them,

300-730 Clearer Explanation: https://www.trainingdumps.com/300-730_exam-valid-dumps.html

BONUS!!! Download part of TrainingDumps 300-730 dumps for free: https://drive.google.com/open?id=1SGbJUnYLI1apMywGvupOJdIY5a1uGmQ6

Report this page